Product Description

1. Cooling capacity for one cell is from **0 to ***0m3/H, relevant refrigerationton is from ***0 to ***0. Several cells can be fixed together. 2. Body frame: A. JBNG series: Made up by steel bar, round and square steel pipe. All components are hot dip galvanized or handled with other special embalmment. Thus it is anticorrosion and high intensity. This steel structural framework is stable to stand typhoon of *2th degree and earthquake measuring 7.0 on the Richter Scale. The tower flat can bear pressure bigger than **0 kgf/m2. B. JBNS series: Made up by reinforced, cement and concrete. The whole structure is featured by stability, low vibration, anticorrosion, and long service life. Supportand casing components are hot dip galvanized or handled with other specialembalmment. 3. Casing: Made of reinforced compound material. The body surface is imported colorizedgel-coat surface, which contains ultraviolet radiation absorbefacient. As a result, its surface is smooth and clean, corrosion-free as well as antiultraviolet. This kind of surface will bear aging and fading. Customer may select the color freely. 4. Drive system: Use horizontal shaft drive gear reducer. For easier maintenance, motor is fixed outside fan stack while oil ruler outside fan stack. All the motors, fans, reducers are from most well-know manufacturers in China. Standard motor is of single speed, but if customer requires specifically, we can also provide double or three-speed motor. As to fan and reducer, we can customer selected brand or use imported ones. 5. Distribution system: Use distribution pipe fixed with advanced gravitational nozzle in the world. It may work at low water supplier pressure, sprinkle water equally, and never jam. 6. Sprinkling fill: Use high efficient PVC fill. The piece mould is tested by authority department, compared to other fill, it has such advantages as larger surface, small air resistance, good hydrophile, large heat transfer coefficient, firm assembly, never jam, easily to clean, good fire resistance and bearing aging. The fillcan work at high temperature from *5oC to *5oC. 7. Eliminator and louver: Use national advanced special three-dimensional eliminator, impact of which is rather remarkable, with drift loss of less than 0.**5 percent. Fan stack is made by high strength composite, kinetic energy of which can be reclaimed. Thus air flow distribution in the cooling tower is rational. And JBNG seriescooling tower has following advantages as high efficiency, light weight, anti-corrosion, large kinetic energy reclaim data, high intensity, large wind load(wind load larger than **0 kgf/m2) 8. Guarantee of cooling capacity: Designed strictly on GB ***0.*****7 and advanced design idea in the world; Tested in Jinling Thermal Performance Test Lab, which is built on CTI standard. Production is controlled and guaranteed by ISO***1 and ISO****1. 9. Jinling shall provide: 1). The entire steel frame above cold water basin. If customer need fibre cold water basin, he shall state before place order, and the price will be recalculated. 2). FRP fan stack, side casing, top casing and partitions. 3). Sprinkling fill 4). Eliminator 5). Fan and motor 6). Inside water distribution pipe and sprinkling nozzle 7). Water inlet flange (valve and up- down connection pipe not included)